Sprinkler Valve Repair in Richland Hills, TX

Sprinkler Valve Repair in Richland Hills, Texas

A Richland Hills zone that will not start — or will not stop — is often the valve in a wet box.

Richland Hills issues are often parkway heads and aging valves.

Handley-Ederville

Most “my sprinklers will not come on” calls are a valve or a wire, not a controller. We check 24 volts at the controller, then at the valve. If the coil is open, that is a ten-minute swap. If the rubber inside the valve is shredded, we rebuild the valve in the box so you keep the same manifold.

Bedford valve boxes sit in the wettest corner of the lot. After a a North Texas storm they fill. Debris holds a rubber inside the valve open. That is the zone that waters the street at 2 a.m. We clean, rebuild, and raise the box if it is buried under two inches of St. Augustine.

Commercial manifolds and HOA common boxes get labeled. Homeowners should be able to find zone 3 without a séance.

Why Richland Hills lawns fail this way

Richland Hills is Mid-Cities watering: clay that breaks pipe, St. Augustine and Bermuda that want a soak, North Texas storms that wipe timers, and mowers that take every proud pop-up.

Soil. clay

Grass. St. Augustine

Houses. compact Mid-Cities lots Typical failures: shallow pipe, stuck valves

We restore the parkway or yard when the trench is closed. If Richland Hills has city sidewalk rules or an HOA standard, we follow it. Utility lines get marked before every cut.

How a visit works

1. Meter the circuit Voltage at the controller and at the coil.
2. Open the box Solenoid, rubber inside the valve, ports, and the union.
3. Rebuild or replace Same-brand parts when we can. Compatible when we cannot.
4. Cycle twice On and off with no weep.

Neighborhoods and zips

Neighborhoods in Richland Hills: Central Richland Hills. Zip codes: 76118. County: Tarrant County.